adsk-20240229
0000769397false00007693972024-02-292024-02-29

UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, DC 20549
 
FORM 8-K
 
CURRENT REPORT
Pursuant to Section 13 or 15(d) of
The Securities Exchange Act of 1934
 
Date of Report (Date of earliest event reported)
 
February 29, 2024
 
 
Autodesk, Inc.
(Exact name of registrant as specified in its charter)
 
Delaware 000-14338 94-2819853
(State or other jurisdiction of
incorporation)
 (Commission File Number) (IRS Employer
Identification No.)

One Market Street, Ste. 400
San Francisco,California94105
(Address of principal executive offices)(Zip Code)

(415) 507-5000
(Registrant’s telephone number, including area code)
 
(Former name or former address, if changed since last report)
 
Check the appropriate box below if the Form 8-K filing is intended to simultaneously satisfy the filing obligation of the registrant under any of the following provisions (see General Instruction A.2. below): 
[] Written communications pursuant to Rule 425 under the Securities Act (17 CFR 230.425)
[] Soliciting material pursuant to Rule 14a-12 under the Exchange Act (17 CFR 240.14a-12)
[] Pre-commencement communications pursuant to Rule 14d-2(b) under the Exchange Act (17 CFR 240.14d-2(b))
[] Pre-commencement communications pursuant to Rule 13e-4(c) under the Exchange Act (17 CFR 240.13e-4(c))


Securities registered pursuant to Section 12(b) of the Act:
Title of each classTrading Symbol(s)Name of each exchange on which registered
Common Stock, par value $0.01 per shareADSKThe Nasdaq Global Select Market
Indicate by check mark whether the registrant is an emerging growth company as defined in Rule 405 of the Securities Act of 1933 (§230.405 of this chapter) or Rule 12b-2 of the Securities Exchange Act of 1934 (§240.12b-2 of this chapter).
Emerging growth company []




If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. [  ]




Item 2.02. Results of Operations and Financial Condition.
 
On February 29, 2024, Autodesk, Inc. (“Autodesk” or the “Company”) issued a press release reporting financial results for the fourth quarter ended January 31, 2024.  The press release is furnished herewith as Exhibit 99.1 and is incorporated herein by reference.
 
The exhibit shall not be deemed “filed” for purposes of Section 18 of the Securities Exchange Act of 1934, as amended (the “Exchange Act”), or incorporated by reference in any filing under the Securities Act of 1933, as amended, or the Exchange Act, except as shall be expressly set forth by specific reference in such a filing.
 
Key Performance Metrics

In order to help better understand Autodesk’s financial performance, Autodesk uses several key performance metrics including billings, recurring revenue, net revenue retention rate (“NR3”), and subscriptions. These metrics are key performance metrics and should be viewed independently of revenue and deferred revenue as these metrics are not intended to be combined with those items. Autodesk uses these metrics to monitor the strength of its recurring business. Autodesk believes these metrics are useful to investors because they can help in monitoring the long-term health of Autodesk’s business. Autodesk’s determination and presentation of these metrics may differ from that of other companies. The presentation of these metrics is meant to be considered in addition to, not as a substitute for or in isolation from, Autodesk financial measures prepared in accordance with GAAP.

Non-GAAP Financial Measures
 
To supplement Autodesk’s condensed consolidated financial statements presented on a GAAP basis, the press release furnished herewith as Exhibit 99.1 provides investors with certain non-GAAP measures, including but not limited to historical and future non-GAAP operating margin, non-GAAP income from operations, non-GAAP free cash flow, and non-GAAP diluted net income per share. For Autodesk’s internal budgeting and resource allocation process and as a means to evaluate period-to-period comparisons, Autodesk uses non-GAAP measures to supplement its condensed consolidated financial statements presented on a GAAP basis. These non-GAAP measures do not include certain items that may have a material impact upon Autodesk’s reported financial results. Autodesk uses non-GAAP measures in making operating decisions because Autodesk believes those measures provide meaningful supplemental information for management regarding the Company's earning potential and performance by excluding certain expenses and charges that may not be indicative of the Company’s core business operating results. For the reasons set forth below, Autodesk believes that these non-GAAP financial measures are useful to investors both because (1) they allow for greater transparency with respect to key metrics used by management in its financial and operational decision-making and (2) they are used by Autodesk’s institutional investors and the analyst community to help them analyze the health of the Company's business. This allows investors and others to better understand and evaluate Autodesk’s operating results and future prospects in the same manner as management, compare financial results across accounting periods and to those of peer companies, and to better understand the long-term performance of its core business. Autodesk also uses some of these measures for purposes of determining company-wide incentive compensation.

As described above, Autodesk may exclude the following items, as applicable, from its non-GAAP measures:
 
A. Stock-based compensation expenses. Autodesk excludes stock-based compensation expenses from its non-GAAP measures primarily because they are non-cash expenses and management finds it useful to exclude certain non-cash charges to assess the appropriate level of various operating expenses to assist in budgeting, planning, and forecasting future periods. Moreover, because of varying available valuation methodologies, subjective assumptions and the variety of award types that companies can use under FASB ASC Topic 718, Autodesk believes that excluding stock-based compensation expenses allows investors to make meaningful comparisons between its recurring core business operating results and those of other companies.
 
B. Amortization of developed technologies and purchased intangibles.  Autodesk incurs amortization of acquisition-related developed technology and purchased intangibles in connection with acquisitions of certain businesses and technologies. Amortization of developed technologies and purchased intangibles is inconsistent in amount and frequency and is significantly affected by the timing and size of Autodesk's acquisitions. Management finds it useful to exclude these variable charges from our cost of revenues to assist in budgeting, planning and forecasting future periods. Investors should note that the use of intangible assets contributed to our revenues earned during the periods presented and will contribute to Autodesk's future period revenues as well. Amortization of developed technologies and purchased intangible assets will recur in future periods.

C. CEO transition costs. Autodesk excludes amounts paid to the Company's former CEOs, upon departure under the terms of their transition agreements, including severance payments, acceleration of restricted stock units, and continued vesting of performance



stock units, and legal fees incurred with the transition. Also excluded from Autodesk's non-GAAP measures are recruiting costs related to the search for a new CEO. These costs represent non-recurring expenses and are not indicative of Autodesk's ongoing operating expenses. Autodesk further believes that excluding the CEO transition costs from its non-GAAP results is useful to investors in that it allows for period-over-period comparability.

D. Goodwill impairment. This is a non-cash charge to write down goodwill to fair value when there was an indication that the asset was impaired. As explained above, management finds it useful to exclude certain non-cash charges to assess the appropriate level of various operating expenses to assist in budgeting, planning, and forecasting future periods.
 
E. Restructuring and other exit costs, net. These expenses are associated with realigning Autodesk's business strategies based on current economic conditions. In connection with these restructuring actions or other exit actions, Autodesk recognizes costs related to termination benefits for former employees whose positions were eliminated, the closure of facilities, and cancellation of certain contracts. Autodesk excludes these charges because these expenses are not reflective of ongoing business and operating results. Autodesk believes it is useful for investors to understand the effects of these items on its total operating expenses.

F. Lease-related asset impairments and other charges.  These charges are associated with the optimization of Autodesk's facilities costs related to leases that Autodesk vacated as a result of Autodesk's one-time move to a more hybrid remote workforce. In connection with these facility leases, Autodesk recognizes costs related to the impairment or abandonment of operating lease right-of-use assets, computer equipment, furniture, and leasehold improvements, and other costs. Autodesk excludes these charges because these expenses are not reflective of ongoing business and operating results. Autodesk believes it is useful for investors to understand the effects of these items on Autodesk's total operating expenses.

G. Acquisition-related costs. Autodesk excludes certain acquisition-related costs, including due diligence costs, professional fees in connection with an acquisition, certain financing costs, and certain integration-related expenses.  These expenses are unpredictable, and dependent on factors that may be outside of Autodesk's control and unrelated to the continuing operations of the acquired business or Autodesk.  In addition, the size and complexity of an acquisition, which often drives the magnitude of acquisition-related costs, may not be indicative of such future costs.  Autodesk believes excluding acquisition-related costs facilitates the comparison of its financial results to the Autodesk's historical operating results and to other companies in its industry.

H. Loss (gain) on strategic investments and dispositions. Autodesk excludes gains and losses related to its strategic investments and dispositions of strategic investments, purchased intangibles, and businesses from its non-GAAP measures primarily because management finds it useful to exclude these variable gains and losses on these investments and dispositions in assessing Autodesk's financial results. Included in these amounts are non-cash unrealized gains and losses, dividends received, realized gains and losses on the sales or losses on the impairment of these investments, and gain and loss on dispositions. Autodesk believes excluding these items is useful to investors because these excluded items do not correlate to the underlying performance of its business and these losses or gains were incurred in connection with strategic investments and dispositions which do not occur regularly.

I. Discrete tax provision items. Autodesk excludes the GAAP tax provision, including discrete items, from the non-GAAP measure of net income (loss), and includes a non-GAAP tax provision based upon the projected annual non-GAAP effective tax rate. Discrete tax items include income tax expenses or benefits that do not relate to ordinary income from continuing operations in the current fiscal year, unusual or infrequently occurring items, or the tax impact of certain stock-based compensation. Examples of discrete tax items include, but are not limited to, certain changes in judgment and changes in estimates of tax matters related to prior fiscal years, certain costs related to business combinations, certain changes in the realizability of deferred tax assets, or changes in tax law. Management believes this approach assists investors in understanding the tax provision and the effective tax rate related to ongoing operations. Autodesk believes the exclusion of these discrete tax items provides investors with useful supplemental information about the Company's operational performance.
 
J. Establishment (release) of a valuation allowance on certain net deferred tax assets.  This is a non-cash charge to record or to release a valuation allowance on certain deferred tax assets. As explained above, management finds it useful to exclude certain non-cash charges to assess the appropriate level of various cash expenses to assist in budgeting, planning, and forecasting future periods.

K. Income tax effects on the difference between GAAP and non-GAAP costs and expenses. The income tax effects that are excluded from the non-GAAP measures relate to the tax impact on the difference between GAAP and non-GAAP expenses, primarily due to stock-based compensation, amortization of purchased intangibles, and restructuring charges and other exit costs (benefits) for GAAP and non-GAAP measures.

There are limitations in using non-GAAP financial measures because non-GAAP financial measures are not prepared in accordance with GAAP and may be different from non-GAAP financial measures used by other companies. The non-GAAP financial measures



are limited in value because they exclude certain items that may have a material impact upon our reported financial results. In addition, they are subject to inherent limitations as they reflect the exercise of judgments by management about which charges are excluded from the non-GAAP financial measures. Autodesk compensates for these limitations by analyzing current and future results on a GAAP basis as well as a non-GAAP basis and also by providing GAAP measures in our public disclosures. The presentation of non-GAAP financial information is meant to be considered in addition to, not as a substitute for or in isolation from, the directly comparable financial measures prepared in accordance with GAAP. Autodesk urges investors to review the reconciliation of its non-GAAP financial measures to the comparable GAAP financial measures included in Exhibit 99.1 and not to rely on any single financial measure to evaluate its business.

Item 7.01. Regulation FD Disclosures

On February 29, 2024, Autodesk posted supplemental investor materials on its investors.autodesk.com website. Autodesk uses its investors.autodesk.com website as a means of disclosing material non-public information, announcing upcoming investor conferences and for complying with its disclosure obligations under Regulation FD. Accordingly, investors should monitor Autodesk’s investor relations website in addition to following Autodesk’s press releases, SEC filings and public conference calls and webcasts.

The information in this current report on Form 8-K and the exhibit attached hereto shall not be deemed “filed” for purposes of Section 18 of the Securities Exchange Act of 1934, as amended (the “Exchange Act”) or otherwise subject to the liabilities of that section, nor shall it be deemed incorporated by reference in any filing under the Securities Act of 1933, as amended, or the Exchange Act, regardless of any general incorporation language in such filing.
Item 9.01.  Financial Statements and Exhibits.
 
(d)  Exhibits.
 
Exhibit No.
Description
 
99.1
104Cover Page Interactive Data File (embedded within the Inline XBRL document)






SIGNATURES
 
Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned hereunto duly authorized.

 AUTODESK, INC.
  
 
By:  /s/  STEPHEN W. HOPE
                                                              
 Stephen W. Hope
Senior Vice President and Chief Accounting Officer (Principal Accounting Officer)
 
Date:  February 29, 2024

Document




AUTODESK, INC. ANNOUNCES FISCAL 2024 FOURTH QUARTER AND FULL-YEAR RESULTS
- Fourth quarter revenue grew 11 percent, and 14 percent at constant exchange rates, to $1.5 billion
- Fourth quarter current remaining performance obligations grew 13 percent, to $4.0 billion


SAN FRANCISCO, FEBRUARY 29, 2024-- Autodesk, Inc. (NASDAQ: ADSK) today reported financial results for the fourth quarter and full year of fiscal 2024.

All growth rates are compared to the fourth quarter and full year of fiscal 2023, respectively, unless otherwise noted. A reconciliation of GAAP to non-GAAP results is provided in the accompanying tables. For definitions, please view the Glossary of Terms later in this document.

Fourth Quarter Fiscal 2024 Financial Highlights

Total revenue increased 11 percent to $1.47 billion;
GAAP operating margin was 21 percent, flat compared to the prior period;
Non-GAAP operating margin was 36 percent, flat compared to the prior period;
GAAP diluted EPS was $1.31; Non-GAAP diluted EPS was $2.09;
Cash flow from operating activities was $437 million; free cash flow was $427 million.

“We are undertaking a multi-year process to develop lifecycle solutions, powered by shared platform services, and with Autodesk’s Data Model at its core. Together, these will enable Autodesk, its customers, and partners, to create more valuable, data-driven, and connected products and services,” said Andrew Anagnost, Autodesk president and CEO. "Having led the industry in generative design, we are leading again in 3D generative AI. Our new multimodal foundation models will enable design and make customers to automate low-value and repetitive tasks and generate more high-value, complex designs more rapidly and with much greater consistency. We can already generate 3D representations from images 10 times faster and with vastly higher quality than currently available 3D AI."

“Autodesk remains resilient and underlying demand for our products and services is robust. As a result, revenue grew 14 percent at constant currency in the fourth quarter,” said Debbie Clifford, Autodesk CFO. “Adjusting the mid-point of our guidance to exclude noise from the new transaction model, acquisitions, the absence of EBA true-up revenue, and FX, we expect underlying revenue to grow more than 10 percent in fiscal 25.”

Fourth Quarter Fiscal 2024 Additional Financial Details

Total billings decreased 19 percent to $1.71 billion.
Total revenue was $1.47 billion, an increase of 11 percent as reported, and 14 percent on a constant currency basis. Recurring revenue represents 98 percent of total.
Design revenue was $1.22 billion, an increase of 10 percent as reported, and 12 percent on a constant currency basis. On a sequential basis, Design revenue increased 2 percent as reported and on a constant currency basis.
1





Make revenue was $138 million, an increase of 16 percent as reported, and 17 percent on a constant currency basis. On a sequential basis, Make revenue increased 3 percent as reported and on a constant currency basis.
Subscription plan revenue was $1.34 billion, an increase of 10 percent as reported, and 13 percent on a constant currency basis. On a sequential basis, subscription plan revenue increased 2 percent as reported, and 3 percent on a constant currency basis.
Net revenue retention rate was within the range of 100 to 110 percent on a constant currency basis.
GAAP operating income was $315 million, compared to $277 million in the fourth quarter last year. GAAP operating margin was 21 percent, flat compared to the prior period.
Total non-GAAP operating income was $522 million, compared to $479 million in the fourth quarter last year. Non-GAAP operating margin was 36 percent, flat compared to the prior period.
GAAP diluted net income per share was $1.31, compared to $1.35 in the fourth quarter last year.
Non-GAAP diluted net income per share was $2.09, compared to $1.86 in the fourth quarter last year.
Deferred revenue decreased 7 percent to $4.26 billion. Unbilled deferred revenue was $1.84 billion, an increase of $801 million compared to the fourth quarter last year. Remaining performance obligations (RPO) increased 9 percent to $6.11 billion. Current RPO increased 13 percent to $3.98 billion.
Cash flow from operating activities was $437 million, a decrease of 474 million compared to the fourth quarter last year. Free cash flow was $427 million, a decrease of $476 million compared to the fourth quarter last year.

Net Revenue by Geographic Area
Three Months Ended January 31, 2024Three Months Ended January 31, 2023Change compared to
prior fiscal year
Constant currency change compared to prior fiscal year
(In millions, except percentages)$    %    %    
Net Revenue:
Americas
U.S.$517 $451 $66 15 %*
Other Americas139 101 38 38 %*
Total Americas656 552 104 19 %19 %
Europe, Middle East and Africa546 508 38 %11 %
Asia Pacific267 258 %%
Total Net Revenue$1,469 $1,318 $151 11 %14 %
____________________
* Constant currency data not provided at this level.
2






Net Revenue by Product Family

Our product offerings are focused in four primary product families: Architecture, Engineering and Construction ("AEC"), AutoCAD and AutoCAD LT, Manufacturing ("MFG"), and Media and Entertainment ("M&E").
 Three Months EndedChange compared to
prior fiscal year
(In millions, except percentages)January 31, 2024January 31, 2023$    %    
AEC $696 $602 $94 16 %
AutoCAD and AutoCAD LT 377 362 15 %
MFG292 257 35 14 %
M&E77 74 %
Other27 23 17 %
Total Net Revenue$1,469 $1,318 $151 11 %


Fiscal 2024 Financial Highlights

Total billings decreased 11 percent to $5.18 billion.
Total revenue was $5.50 billion, an increase of 10 percent as reported, and 13 percent on a constant currency basis. Recurring revenue represents 98 percent of total.
Design revenue was $4.65 billion, an increase of 9 percent as reported, and 12 percent on a constant currency basis.
Make revenue was $523 million, an increase of 16 percent as reported, and 18 percent on a constant currency basis.
Subscription plan revenue was $5.12 billion, an increase of 10 percent as reported, and 13 percent on a constant currency basis.
Total subscriptions increased approximately 785 thousand from the end of fiscal 2023 to 7.53 million at the end of fiscal 2024. Total subscriptions adjusted for the multi-user trade-in increased approximately 715 thousand from fiscal 2023 to 6.97 million.
GAAP operating income was $1.13 billion, compared to $989 million last year. GAAP operating margin was 21 percent, up 1 percentage point.
Total non-GAAP operating income was $1.96 billion, compared to $1.79 billion last year. Non-GAAP operating margin was 36 percent, flat compared to the prior period.
GAAP diluted net income per share was $4.19, compared to $3.78 last year.
Non-GAAP diluted net income per share was $7.60, compared to $6.63 last year.
Cash flow from operating activities decreased to $1.31 billion, compared to $2.07 billion in fiscal 2023. Free cash flow decreased to $1.28 billion, compared to $2.03 billion in fiscal 2023.

3





Net Revenue by Geographic Area
Fiscal Year Ended January 31, 2024Fiscal Year Ended January 31, 2023Change compared to
prior fiscal year
Constant currency change compared to prior fiscal year
(In millions, except percentages)$    %    %    
Net Revenue:
Americas
U.S.$1,978 $1,720 $258 15 %*
Other Americas460 372 88 24 %*
Total Americas2,438 2,092 346 17 %17 %
EMEA2,042 1,906 136 %12 %
APAC1,017 1,007 10 %%
Total Net Revenue$5,497 $5,005 $492 10 %13 %
____________________
* Constant currency data not provided at this level.


Net Revenue by Product Family

Our product offerings are focused in four primary product families: AEC, AutoCAD and AutoCAD LT, MFG, and M&E.
 Fiscal Year EndedChange compared to
prior fiscal year
(In millions, except percentages)January 31, 2024January 31, 2023$    %    
AEC$2,580 $2,278 $302 13 %
AutoCAD and AutoCAD LT1,462 1,387 75 %
MFG1,063 978 85 %
M&E295 291 %
Other97 71 26 37 %
Total Net Revenue$5,497 $5,005 $492 10 %


4





Business Outlook

The following are forward-looking statements based on current expectations and assumptions, and involve risks and uncertainties, some of which are set forth below under "Safe Harbor Statement." Autodesk's business outlook for the first quarter and full-year fiscal 2025 takes into consideration the current economic environment and foreign exchange currency rate environment. A reconciliation between the fiscal 2024 GAAP and non-GAAP estimates is provided below or in the tables later in this document.

First Quarter Fiscal 2025
Q1 FY25 Guidance MetricsQ1 FY25
(ending April 30, 2024)
Revenue (in millions)$1,385 - $1,400
EPS GAAP$0.96 - $1.01
EPS non-GAAP (1)$1.73- $1.78
____________________
(1) Non-GAAP earnings per diluted share excludes $0.72 related to stock-based compensation expense, $0.11 for the amortization of both purchased intangibles and developed technologies, and $0.08 for acquisition-related costs, partially offset by ($0.14) related to GAAP-only tax charges.

Full-Year Fiscal 2025
FY25 Guidance MetricsFY25
(ending January 31, 2025)
Billings (in millions) $5,810 - $5,960
Up 12% - 15%
Revenue (in millions) (1)$5,990 - $6,090
Up 9% - 11%
GAAP operating margin20% - 21%
Non-GAAP operating margin (2)35% - 36%
EPS GAAP$4.41 - $4.63
EPS non-GAAP (3)$7.89 - $8.11
Free cash flow (in millions) (4)$1,430 - $1,500
____________________
(1) Excluding the impact of foreign currency exchange rates and hedge gains/losses, revenue guidance range would be approximately 1 percentage point higher.
(2) Non-GAAP operating margin excludes approximately 12% related to stock-based compensation expense, approximately 2% for the amortization of both purchased intangibles and developed technologies, and approximately 1% related to acquisition-related costs.
(3) Non-GAAP earnings per diluted share excludes $3.39 related to stock-based compensation expense, $0.50 for the amortization of both purchased intangibles and developed technologies, and $0.26 related to acquisition-related costs, partially offset by ($0.67) related to GAAP-only tax charges.
(4) Free cash flow is cash flow from operating activities less approximately $30 million of capital expenditures.

The first quarter and full-year fiscal 2025 outlook assume a projected annual effective tax rate of 21 percent for GAAP and 19 percent for non-GAAP results, respectively. Shifts in geographic profitability continue to impact the annual effective tax rate due to significant differences in tax rates in various jurisdictions. As such, assumptions for the annual effective tax rate are evaluated regularly and may change based on the projected geographic mix of earnings.
5






Earnings Conference Call and Webcast

Autodesk will host its fourth quarter conference call today at 5 p.m. ET. The live broadcast can be accessed at autodesk.com/investor. A transcript of the opening commentary will also be available following the conference call.

A replay of the broadcast will be available at 7 p.m. ET at autodesk.com/investor. This replay will be maintained on Autodesk's website for at least 12 months.

Investor Presentation Details

An investor presentation, excel financials and other supplemental materials providing additional information can be found at autodesk.com/investor.

Contacts
Investors:
Simon Mays-Smith
415-746-0137
simon.mays-smith@autodesk.com
        
Press:
Renée Francis
628-888-4599
renee.francis@autodesk.com
    

Key Performance Metrics

To help better understand our financial performance, we use several key performance metrics including billings, recurring revenue, net revenue retention rate ("NR3") and subscriptions. These metrics are key performance metrics and should be viewed independently of revenue and deferred revenue. These metrics are not intended to be combined with those items. We use these metrics to monitor the strength of our recurring business. We believe these metrics are useful to investors because they can help in monitoring the long-term health of our business. Our determination and presentation of these metrics may differ from that of other companies. The presentation of these metrics is meant to be considered in addition to, not as a substitute for or in isolation from, our financial measures prepared in accordance with GAAP.

Glossary of Terms

Billings: Total revenue plus the net change in deferred revenue from the beginning to the end of the period.

Cloud Service Offerings: Represents individual term-based offerings deployed through web browser technologies or in a hybrid software and cloud configuration. Cloud service offerings that are bundled with other product offerings are not captured as a separate cloud service offering.

6





Constant Currency (CC) Growth Rates: We attempt to represent the changes in the underlying business operations by eliminating fluctuations caused by changes in foreign currency exchange rates as well as eliminating hedge gains or losses recorded within the current and comparative periods. We calculate constant currency growth rates by (i) applying the applicable prior period exchange rates to current period results and (ii) excluding any gains or losses from foreign currency hedge contracts that are reported in the current and comparative periods.

Design Business: Represents the combination of maintenance, product subscriptions, and all EBAs. Main products include, but are not limited to, AutoCAD, AutoCAD LT, Industry Collections, Revit, Inventor, Maya, and 3ds Max. Certain products, such as our computer aided manufacturing solutions, incorporate both Design and Make functionality and are classified as Design.

Enterprise Business Agreements (EBAs): Represents programs providing enterprise customers with token-based access to a broad pool of Autodesk products over a defined contract term.

Flex: A pay-as-you-go consumption option to pre-purchase tokens to access any product available with Flex for a daily rate.

Free Cash Flow: Cash flow from operating activities minus capital expenditures.

Industry Collections: Autodesk Industry Collections are a combination of products and services that target a specific user objective and support a set of workflows for that objective. Our Industry Collections consist of: Autodesk Architecture, Engineering and Construction Collection, Autodesk Product Design and Manufacturing Collection, and Autodesk Media and Entertainment Collection.

Maintenance Plan: Our maintenance plans provide our customers with a cost effective and predictable budgetary option to obtain the productivity benefits of our new releases and enhancements when and if released during the term of their contracts. Under our maintenance plans, customers are eligible to receive unspecified upgrades when and if available, and technical support. We recognize maintenance revenue over the term of the agreements, generally one year.

Make Business: Represents certain cloud-based product subscriptions. Main products include, but are not limited to, Assemble, Autodesk Build, BIM Collaborate Pro, BuildingConnected, Fusion, and Flow Production Tracking. Certain products, such as Fusion, incorporate both Design and Make functionality and are classified as Make.

Net Revenue Retention Rate (NR3): Measures the year-over-year change in Recurring Revenue for the population of customers that existed one year ago (“base customers”). Net revenue retention rate is calculated by dividing the current quarter Recurring Revenue related to base customers by the total corresponding quarter Recurring Revenue from one year ago. Recurring Revenue is based on USD reported revenue, and fluctuations caused by changes in foreign currency exchange rates and hedge gains or losses have not been eliminated. Recurring Revenue related to acquired companies, one year after acquisition, has been captured as existing customers until such data conforms to the calculation methodology. This may cause variability in the comparison.
7






Other Revenue: Consists of revenue from consulting, training and other products and services, and is recognized as the products are delivered and services are performed.

Product Subscription: Provides customers a flexible, cost-effective way to access and manage 3D design, engineering, and entertainment software tools. Our product subscriptions currently represent a hybrid of desktop and cloud functionality, which provides a device-independent, collaborative design workflow for designers and their stakeholders.

Recurring Revenue: Consists of the revenue for the period from our traditional maintenance plans, our subscription plan offerings, and certain Other revenue. It excludes subscription revenue related to third-party products. Recurring revenue acquired with the acquisition of a business is captured when total subscriptions are captured in our systems and may cause variability in the comparison of this calculation.

Remaining Performance Obligations (RPO): The sum of total short-term, long-term, and unbilled deferred revenue. Current remaining performance obligations is the amount of revenue we expect to recognize in the next twelve months.

Solution Provider: Solution Provider is the name of our channel partners who serve our customers worldwide. Solution Providers may be resellers, agents, or both, in relation to Autodesk solutions.

Spend: The sum of cost of revenue and operating expenses.

Subscription Plan: Comprises our term-based product subscriptions, cloud service offerings, and EBAs. Subscriptions represent a combined hybrid offering of desktop software and cloud functionality which provides a device-independent, collaborative design workflow for designers and their stakeholders. With subscription, customers can use our software anytime, anywhere, and get access to the latest updates to previous versions.

Subscription Revenue: Includes our cloud-enabled term-based product subscriptions, cloud service offerings, and flexible EBAs.

Total Subscriptions: Consists of subscriptions from our maintenance plans and subscription plan offerings that are active and paid as of the fiscal year end date. For certain cloud service offerings and EBAs, subscriptions represent the monthly average activity reported within the last three months of the fiscal quarter end date. Total subscriptions do not include education offerings, consumer product offerings, and third-party products. Subscriptions acquired with the acquisition of a business are captured once the data conforms to our subscription count methodology and when added, may cause variability in comparison of this calculation.

Unbilled Deferred Revenue: Unbilled deferred revenue represents contractually stated or committed orders under early renewal and multi-year billing plans for subscription, services, and maintenance for which the associated deferred revenue has not been recognized. Under FASB Accounting Standards Codification ("ASC") Topic 606, unbilled deferred revenue is not included as a receivable or deferred revenue on our Consolidated Balance Sheet.

8





Safe Harbor Statement

This press release contains forward-looking statements that involve risks and uncertainties, including quotations from management, statements in the paragraphs under “Business Outlook” above statements about our short-term and long-term goals, statements regarding our strategies, market and product positions, performance and results, and all statements that are not historical facts. There are a significant number of factors that could cause actual results to differ materially from statements made in this press release, including: our strategy to develop and introduce new products and services and to move to platforms and capabilities, exposing us to risks such as limited customer acceptance (both new and existing customers), costs related to product defects, and large expenditures; global economic and political conditions, including foreign exchange headwinds, recessionary fears, supply chain disruptions, resulting inflationary pressures and hiring conditions; costs and challenges associated with strategic acquisitions and investments; dependency on international revenue and operations, exposing us to significant international regulatory, economic, intellectual property, collections, currency exchange rate, taxation, political, and other risks, including risks related to the war against Ukraine launched by Russia and our exit from Russia; inability to predict subscription renewal rates and their impact on our future revenue and operating results; existing and increased competition and rapidly evolving technological changes; fluctuation of our financial results, key metrics and other operating metrics; our transition from up front to annual billings for multi-year contracts; deriving a substantial portion of our net revenue from a small number of solutions, including our AutoCAD-based software products and collections; any failure to successfully execute and manage initiatives to realign or introduce new business and sales initiatives; net revenue, billings, earnings, cash flow, or new or existing subscriptions shortfalls; social and ethical issues relating to the use of artificial intelligence in our offerings; our ability to maintain security levels and service performance meeting the expectations of our customers, and the resources and costs required to avoid unanticipated downtime and prevent, detect and remediate performance degradation and security breaches; security incidents or other incidents compromising the integrity of our or our customers’ offerings, services, data, or intellectual property; reliance on third parties to provide us with a number of operational and technical services as well as software; our highly complex software, which may contain undetected errors, defects, or vulnerabilities; increasing regulatory focus on privacy issues and expanding laws; governmental export and import controls that could impair our ability to compete in international markets or subject us to liability if we violate the controls; protection of our intellectual property rights and intellectual property infringement claims from others; the government procurement process; fluctuations in currency exchange rates; our debt service obligations; and our investment portfolio consisting of a variety of investment vehicles that are subject to interest rate trends, market volatility, and other economic factors. Our estimates as to tax rate are based on current tax law, including current interpretations of the Tax Cuts and Jobs Act, and could be affected by changing interpretations of that Act, as well as additional legislation and guidance around that Act.

Further information on potential factors that could affect the financial results of Autodesk are included in Autodesk's Form 10-K and subsequent Forms 10-Q, which are on file with the U.S. Securities and Exchange Commission. Autodesk disclaims any obligation to update the forward-looking statements provided to reflect events that occur or circumstances that exist after the date on which they were made.

9





About Autodesk

Autodesk is changing how the world is designed and made. Our technology spans architecture, engineering, construction, product design, manufacturing, media and entertainment, empowering innovators everywhere to solve challenges big and small. From greener buildings to smarter products to more mesmerizing blockbusters, Autodesk software helps our customers to design and make a better world for all. For more information, visit autodesk.com or follow @autodesk. #MakeAnything

Autodesk uses its investors.autodesk.com website as a means of disclosing material non-public information, announcing upcoming investor conferences and for complying with its disclosure obligations under Regulation FD. Accordingly, you should monitor our investor relations website in addition to following our press releases, SEC filings and public conference calls and webcasts.

Autodesk, AutoCAD, AutoCAD LT, BIM 360 and Fusion 360 are registered trademarks of Autodesk, Inc., and/or its subsidiaries and/or affiliates in the USA and/or other countries. All other brand names, product names or trademarks belong to their respective holders. Autodesk reserves the right to alter product and service offerings, and specifications and pricing at any time without notice, and is not responsible for typographical or graphical errors that may appear in this document.
© 2024 Autodesk, Inc. All rights reserved.
10





Autodesk, Inc.
Condensed Consolidated Statements of Operations
(In millions, except per share data)
 Three Months Ended January 31,Fiscal Year Ended January 31,
 2024202320242023
(Unaudited)
Net revenue:
Subscription$1,339 $1,214 $5,116 $4,651 
Maintenance14 14 54 65 
    Total subscription and maintenance revenue 1,353 1,228 5,170 4,716 
Other116 90 327 289 
Total net revenue1,469 1,318 5,497 5,005 
Cost of revenue:
Cost of subscription and maintenance revenue96 90 381 343 
Cost of other revenue20 20 82 79 
Amortization of developed technologies14 14 48 58 
Total cost of revenue130 124 511 480 
Gross profit1,339 1,194 4,986 4,525 
Operating expenses:
Marketing and sales479 439 1,823 1,745 
Research and development352 313 1,373 1,219 
General and administrative182 155 620 532 
Amortization of purchased intangibles11 10 42 40 
Total operating expenses1,024 917 3,858 3,536 
Income from operations315 277 1,128 989 
Interest and other income (expense), net22 — (43)
Income before income taxes337 277 1,136 946 
(Provision) benefit for income taxes(55)16 (230)(123)
Net income$282 $293 $906 $823 
Basic net income per share$1.32 $1.36 $4.23 $3.81 
Diluted net income per share$1.31 $1.35 $4.19 $3.78 
Weighted average shares used in computing basic net income per share214 216 214 216 
Weighted average shares used in computing diluted net income per share216 217 216 218 


11





Autodesk, Inc.
Condensed Consolidated Balance Sheets
(In millions)
January 31, 2024January 31, 2023
(Unaudited)
ASSETS
Current assets:
Cash and cash equivalents$1,892 $1,947 
Marketable securities354 125 
Accounts receivable, net876 961 
Prepaid expenses and other current assets457 308 
Total current assets3,579 3,341 
Long-term marketable securities234 102 
Computer equipment, software, furniture and leasehold improvements, net121 144 
Operating lease right-of-use assets224 245 
Intangible assets, net406 407 
Goodwill3,653 3,625 
Deferred income taxes, net1,093 1,014 
Long-term other assets602 560 
Total assets$9,912 $9,438 
LIABILITIES AND STOCKHOLDERS’ EQUITY
Current liabilities:
Accounts payable$100 $102 
Accrued compensation476 358 
Accrued income taxes36 33 
Deferred revenue3,500 3,203 
Operating lease liabilities67 85 
Other accrued liabilities172 219 
Total current liabilities4,351 4,000 
Long-term deferred revenue764 1,377 
Long-term operating lease liabilities275 300 
Long-term income taxes payable168 164 
Long-term deferred income taxes25 32 
Long-term notes payable, net2,284 2,281 
Long-term other liabilities190 139 
Stockholders’ equity:
Common stock and additional paid-in capital3,802 3,325 
Accumulated other comprehensive loss(234)(185)
Accumulated deficit(1,713)(1,995)
Total stockholders’ equity 1,855 1,145 
Total liabilities and stockholders' equity $9,912 $9,438 
12





Autodesk, Inc.
Condensed Consolidated Statements of Cash Flows
(In millions)
 Fiscal Year Ended January 31,
 20242023
(Unaudited)
Operating activities:
Net income$906 $823 
Adjustments to reconcile net income to net cash provided by operating activities:
Depreciation, amortization and accretion139 150 
Stock-based compensation expense703 657 
Deferred income taxes(86)(277)
Lease-related asset impairments14 34 
Other operating activities(52)(8)
Changes in operating assets and liabilities, net of business combinations:
Accounts receivable86 (247)
Prepaid expenses and other assets(77)(3)
Accounts payable and other liabilities(12)(5)
Deferred revenue(316)798 
Accrued income taxes149 
Net cash provided by operating activities1,313 2,071 
Investing activities:
Purchases of marketable securities(1,110)(397)
Sales of marketable securities277 152 
Maturities of marketable securities487 298 
Purchases of intangible assets(30)(6)
Business combinations, net of cash acquired(70)(96)
Capital expenditures(31)(40)
Other investing activities(25)(54)
Net cash used in investing activities(502)(143)
Financing activities:
Proceeds from issuance of common stock, net of issuance costs130 124 
Taxes paid related to net share settlement of equity awards(187)(160)
Repurchase and retirement of common stock(795)(1,101)
Repayment of debt— (350)
Net cash used in financing activities(852)(1,487)
Effect of exchange rate changes on cash and cash equivalents(14)(22)
Net (decrease) increase in cash and cash equivalents(55)419 
Cash and cash equivalents at beginning of the period1,947 1,528 
Cash and cash equivalents at end of the period$1,892 $1,947 
13





Autodesk, Inc.
Reconciliation of GAAP financial measures to non-GAAP financial measures
(In millions, except per share data)
To supplement our condensed consolidated financial statements presented on a GAAP basis, we provide investors with certain non-GAAP measures including non-GAAP operating margin, non-GAAP income from operations, non-GAAP diluted net income per share, and free cash flow. For our internal budgeting and resource allocation process and as a means to evaluate period-to-period comparisons, we use non-GAAP measures to supplement our condensed consolidated financial statements presented on a GAAP basis. These non-GAAP measures do not include certain items that may have a material impact upon our future reported financial results. We use non-GAAP measures in making operating decisions because we believe those measures provide meaningful supplemental information regarding our earning potential and performance for management by excluding certain expenses and charges that may not be indicative of our core business operating results. For the reasons set forth below, we believe these non-GAAP financial measures are useful to investors both because (1) they allow for greater transparency with respect to key metrics used by management in its financial and operational decision-making and (2) they are used by our institutional investors and the analyst community to help them analyze the health of our business. This allows investors and others to better understand and evaluate our operating results and future prospects in the same manner as management, compare financial results across accounting periods and to those of peer companies and to better understand the long-term performance of our core business. We also use some of these measures for purposes of determining company-wide incentive compensation.
There are limitations in using non-GAAP financial measures because non-GAAP financial measures are not prepared in accordance with GAAP and may be different from non-GAAP financial measures used by other companies. The non-GAAP financial measures are limited in value because they exclude certain items that may have a material impact upon our reported financial results. In addition, they are subject to inherent limitations as they reflect the exercise of judgments by management about which charges are excluded from the non-GAAP financial measures. We compensate for these limitations by analyzing current and future results on a GAAP basis as well as a non-GAAP basis and also by providing GAAP measures in our public disclosures. The presentation of non-GAAP financial information is meant to be considered in addition to, not as a substitute for or in isolation from, the directly comparable financial measures prepared in accordance with GAAP. We urge investors to review the reconciliation of our non-GAAP financial measures to the comparable GAAP financial measures included in this presentation, and not to rely on any single financial measure to evaluate our business.
The following table shows Autodesk's GAAP results reconciled to non-GAAP results included in this release.
Three Months Ended January 31,Fiscal Year Ended January 31,
2024202320242023
(Unaudited)(Unaudited)
GAAP operating margin21 %21 %21 %20 %
Stock-based compensation expense11 %12 %13 %13 %
Amortization of developed technologies%%%%
Amortization of purchased intangibles%%%%
Acquisition-related costs%— %%— %
Lease-related asset impairments and other charges— %%— %%
Non-GAAP operating margin (1)36 %36 %36 %36 %
GAAP income from operations$315 $277 $1,128 $989 
Stock-based compensation expense160 164 703 660 
Amortization of developed technologies12 12 43 53 
Amortization of purchased intangibles11 10 41 40 
Acquisition-related costs17 33 10 
Lease-related asset impairments and other charges13 14 33 
Non-GAAP income from operations$522 $479 $1,962 $1,785 
14





GAAP diluted net income per share$1.31 $1.35 $4.19 $3.78 
Stock-based compensation expense0.74 0.76 3.26 3.03 
Amortization of developed technologies0.05 0.05 0.20 0.24 
Amortization of purchased intangibles0.05 0.04 0.19 0.18 
Acquisition-related costs0.08 0.02 0.15 0.05 
Lease-related asset impairments and other charges0.03 0.06 0.06 0.15 
Loss on strategic investments and dispositions, net0.03 0.04 0.15 — 
Establishment (release) of valuation allowance on deferred tax assets0.07 (0.18)0.07 (0.18)
Discrete GAAP tax items (0.07)0.15 (0.15)0.13 
Income tax effect of non-GAAP adjustments(0.20)(0.43)(0.52)(0.75)
Non-GAAP diluted net income per share$2.09 $1.86 $7.60 $6.63 
Net cash provided by operating activities$437 $911 $1,313 $2,071 
Capital expenditures(10)(8)(31)(40)
Free cash flow$427 $903 $1,282 $2,031 
____________________
(1) Totals may not sum due to rounding.

15